Welcome
Wednesday, November 1, 2023
5:07 AM
I have from today 24-07-2024, combined the TOU'S.
Meaning there will no longer be rules for free designs and another rule for purchased.
My new Updated TOU is for All my designs in general.
So the new change is only number 1,
before you could not use my purchased design for clusters,
blog design so on. You can now.
please email me at anytime at artistic.paw.prints.82@gmail.com
Thank you, and enjoy :-)
Catty_Creations
-------------------------------------------------------------
I have gotten some mails about Copyrights Questions, as those are very important, I will now Highlight the subject very clearly in hopes that it is understandable.
Here is the new section I have added that points to the use of PU tubes (Tubes that are NOT included in my kits)
I am using Goldwasser as an example in this post.
(she gave me thumbs up for this)
No matter what, a real tube artist ALWAYS has to be credited with their copyrights.
So, what you always have to write is
©Goldwasser. Now here is where the doubt and confusion many times occurs.
IF YOU BOUGHT A GOLDWASSER TUBE AS PU
DIRECTLY FROM HER STORE:
and use it in my kits (as I allow my kits to be used with other tubes than those who comes with my kits):
YOU WRITE THIS:
©Goldwasser www.goldwasser.art GA_ (your license name/number from there site) And in a small caption in the corner or were else you see fit on your creation (kit by catty creations)
So, you always credit tube artist full info,
IF you bought the tube as a PU via the artist
sites (Verymany, Verymanyartist, Goldwasser, Misticheskaya) so on.
My kits have artist tubes that is under the license PU/CU.
Therefor My license info has to be written as I inform:
(©Tube artist name) CattyCreations_payhip/CCDezines.com (Your name)
as I bought that artist tubes as a cu license from the artist, which gives me the rights to use that tube either to resell in Png format, or for use in my scrap kits in Png format. (Still with artist Copyrights name) but following my info as designer.
So, all 3 ways is listed here, and goes:
My kits with included tubes by a real tube artist:
(©Tube artist name) payhip/CCDezines.com (Your name)
--------------------------------------------
My kits with AI tube:
CattyCreations_payhip/CCDezines.com (Your name)
--------------------------------------------
My Kits, if you use your own PU tube bought from an artist site:
©Goldwasser www.goldwasser.art GA_ (your license name/number from there site)
And in a small caption in the corner or were else you see fit on your creation (kit by catty creations)
---------------------------------------------
I hope that this helped to clarify a bit better. And of course, you are welcome to contact me if you are still unsure of it.
I have a paid License to the platforms and programs I'm using.
so, under no circumstances is my products allowed to be used for other than personal use! 🌹
You are not allowed to share my products.
**This also goes for my FTU Designs.
I love designing and I Want to continue enjoying what I love, so I ask you to please be kind and respect the few Terms of use 🌹
If you have any questions regarding this, you can always contact me on my mail artistic.paw.prints.82@gmail.com
Sincerely Catty.
Meaning there will no longer be rules for free designs and another rule for purchased.
My new Updated TOU is for All my designs in general.
So the new change is only number 1,
before you could not use my purchased design for clusters,
blog design so on. You can now.
1.) You May Use as PU for Tags, timelines, cluster frames, tutorials, blog designs and so on,
for your own personal use.
2.) You may NOT share this, give away for free, or use to resell in anyway.
3.) You can use other tubes for my kits, it does not have to be the ones included,
and you are welcome to mix my kits,
but you can NOT mix my kits with other designers kits or there AI tubes!!
4.) My freebies (kits,snags,cluster frames so on) Is under the same terms as
everything purchased, PU ONLY!
4.) When using my Designs, Kits or Tubes, this is your license:
@CattyCreations_payhip/CCDezines.com (Your name)
And has to be written ''clearly'' on your finished designs.
- This is NOT accepted: AI by catty creations -
AI generated by catty creations designs, by catty creations and so on...
--------------
Basically you are free to use my designs how you see fit,
as long as my 2 most importen terms are followed.
1.Personal use only
2. And you write your license with my credit info :
@CattyCreations_payhip/CCDezines.com (Your name)
if you have any questions, or you have any problems with the product please email me at anytime at artistic.paw.prints.82@gmail.com
Thank you, and enjoy :-)
Catty_Creations
-------------------------------------------------------------
I have gotten some mails about Copyrights Questions, as those are very important, I will now Highlight the subject very clearly in hopes that it is understandable.
Here is the new section I have added that points to the use of PU tubes (Tubes that are NOT included in my kits)
I am using Goldwasser as an example in this post.
(she gave me thumbs up for this)
No matter what, a real tube artist ALWAYS has to be credited with their copyrights.
So, what you always have to write is
©Goldwasser. Now here is where the doubt and confusion many times occurs.
IF YOU BOUGHT A GOLDWASSER TUBE AS PU
DIRECTLY FROM HER STORE:
and use it in my kits (as I allow my kits to be used with other tubes than those who comes with my kits):
YOU WRITE THIS:
©Goldwasser www.goldwasser.art GA_ (your license name/number from there site) And in a small caption in the corner or were else you see fit on your creation (kit by catty creations)
So, you always credit tube artist full info,
IF you bought the tube as a PU via the artist
sites (Verymany, Verymanyartist, Goldwasser, Misticheskaya) so on.
My kits have artist tubes that is under the license PU/CU.
Therefor My license info has to be written as I inform:
(©Tube artist name) CattyCreations_payhip/CCDezines.com (Your name)
as I bought that artist tubes as a cu license from the artist, which gives me the rights to use that tube either to resell in Png format, or for use in my scrap kits in Png format. (Still with artist Copyrights name) but following my info as designer.
So, all 3 ways is listed here, and goes:
My kits with included tubes by a real tube artist:
(©Tube artist name) payhip/CCDezines.com (Your name)
--------------------------------------------
My kits with AI tube:
CattyCreations_payhip/CCDezines.com (Your name)
--------------------------------------------
My Kits, if you use your own PU tube bought from an artist site:
©Goldwasser www.goldwasser.art GA_ (your license name/number from there site)
And in a small caption in the corner or were else you see fit on your creation (kit by catty creations)
---------------------------------------------
I hope that this helped to clarify a bit better. And of course, you are welcome to contact me if you are still unsure of it.
I have a paid License to the platforms and programs I'm using.
so, under no circumstances is my products allowed to be used for other than personal use! 🌹
You are not allowed to share my products.
**This also goes for my FTU Designs.
I love designing and I Want to continue enjoying what I love, so I ask you to please be kind and respect the few Terms of use 🌹
If you have any questions regarding this, you can always contact me on my mail artistic.paw.prints.82@gmail.com
Sincerely Catty.
Labels:My Blog Journal
My Blinkie
Artistic Paw Prints Blinkie
Labels
- Catty's Tagz (299)
- Exclusive Kits (1)
- Freebie Kits (159)
- October Kits 2024 (2)
- September Kits 2024 (32)
Contact Form
Catty Creations Dezines. Powered by Blogger.
In Loving Memory Of Shannen Maria Doherty
Blog Dezign
